How to Load a Grease Gun
The head needs to be packed with grease.The plunger is usually dry in a new grease gun. Remove both ends of the grease cartridge. With the t-handle out, place the cartridge into the barrel. Screw the barrel into the head of the gun. Push the t-handle right down into the barrel.
Why does grease gun get stuck on ZERK?
Grease guns get stuck on fittings due to clogged zerk fittings which don’t let the grease pass through and cause a pressure build up that prevents them from releasing. So to get it unstuck unscrews the hose or hardline from the gun which will release the pressure and allow it to come off.
How do you use a grease gun on a ZERK?
How to Use a Grease Gun Zerk Fitting
Purchase a grease gun with a zerk fitting on the end of it. Press the end of the grease gun on the end of the zerk fitting. Pump the grease gun.Stop pumping when you see grease squeeze out the edges of the ball joint.
How do you know when a grease fitting is full?
If this is the case, the best tactic is to “feel” the grease into the bearing cavity until slight resistance or back pressure is felt against the trigger, or lever, signaling the bearing cavity is now full.
