Odie’s Oil is great for interior and exterior applications: Boats, Bright work, Doors, Floors, Decks, Gates, Fine Furniture, Patio Furniture, Bowls, Cutting Boards, Kitchen Implements, Toys, etc., etc. The list goes on and on! Odie’s Oil is great for wood turners and can be used as a friction polish!
What is in odies oil?
The oil product is mostly oil with a little wax. The wood butter is a 50/50 blend of oil and wax. And the wax is well, mostly wax. This may be a little over-simplified but you get the idea.
How long does Odie’s oil last?
*Cure time for Odie’s Universal and Super Duper light oil: most surfaces can be used within 24 hours and can be exposed to liquids within 3 to 5 days.
Does odies oil darken wood?
Free Shipping. Odie’s Dark, a rich dark finishing oil, contains natural oxidizing oils that darken wood not only when applied, but also as wood ages. Will also add contrast and patina with age. Use alone or in unison with other Odie’s products to add polish and sheen.
Does odies oil cure?
Odies oil penetrates into the finish and cures. Hardening and protecting the wood from the inside out, Leaving a film of finish on the surface will will hinder the finishes ability to cure, buffing the finish of the wood with a terry cloth towel or lint free cotton rag.
Does odies oil seal wood?
We cannot emphasize enough that Odie’s Oil will finish all types of wood for any application and will produce just about any level of luster desired depending on surface preparation. And as always, our number one rule is relax and enjoy!
Can you use odies oil over stain?
Can I use Odie’s oil on top of an already present stain or finish? Yes, but it’s always best to use Odie’s directly on the wood so it will penetrate the wood fiber and make that barrier against stains and water that makes Odie’s so effective. Also, it is best to use Odie’s products.
Can you sand off odies oil?
You can add a very small amount of Odie’s Oil to the surface and vigorously rub it in with a grey (or white if sanding 800 grit or more) scotch-brite, then immediately buff it off with a cotton terry towel. Wipe your hand across the surface. If it leaves a mark continue to buff off using a cotton terry towel.
Is odies oil flammable?
You can use it on wood, stone, concrete, clay, brick, metal, plastic and leather surfaces for all interior and exterior applications. What kind of protection do Odie’s products ensure? It gives natural UV-protection to the material, is highly water-resistant and classified as a non-flammable material.
How many coats of Odie’s oil do I need?
After the first 24 hours of dry time you can apply a second coat of Odie’s Oil or Odie’s Oxi Oil for additional sheen and protection. Just repeat the process described above. You can apply as many coats as you desire. Both Odie’s Wood Butter and Odie’s Wax can be used as finishes by themselves.
Does odies oil yellow?
Odie’s Oil will bring out the natural figure and beauty of the wood without adding an overly yellow color. Rather, it will enhance the natural color of the wood itself.
Can you polyurethane over odies oil?
A varnish (or varnished look) can be achieved with products or combinations of products that include polyurethanes, lacquers, epoxies, etc. In short; you CAN apply a lacquer or a polyurethane over a Danish oil. Just as you can over any Drying Oil. The key to success is to make sure the oil has fully dried first.
