TimberLOK is a heavy duty wood screw for applications such as attaching rafter or trusses to the top plate, landscape timbers, fences, decks, headers, stair stringers and more.
Are TimberLOK screws structural?
FastenMaster® TimberLok® Structural Screws – No Predrilling – Stronger than 3/8″ Lags! The FastenMaster® TimberLok® Heavy Duty Wood Screw can replace 3/8″ lag screws and enables you to complete wood-to-wood projects faster, easier and stronger.
Are TimberLOK screws strong?
These screws are strong enough to replace ⅜ lag screws, and can even be used as a replacement for traditional H 2.5 hurricane clips for connecting rafters and trusses.
What is the difference between HeadLOK and TimberLOK?
HeadLok is a version of a TimberLOK with a 5/8″ diameter disc type head. It uses a spider drive recess and driver bit which are supplied with the fasteners. HeadLOK is also available in versions for various thicknesses of steel. HeadLOKs can be used in nearly any place a TimberLOK can.
Where are TimberLOK screws made?
TimberLOK fasteners are American made.
What is the diameter of TimberLOK screws?
1 OlyLog and TimberLOK Fasteners: The OlyLog and TimberLOK fasteners have a 5/16-inch (7.9 mm) hex- head, rolled threads and a gimlet point. They have a proprietary corrosion-resistant coating with a lubricious clear top coat. See Table 1A for fastener dimensions and a diagram.
How long should timber screws be?
Timber screws will often measure between half an inch and 3 inches in length. Like all screws, wood fasteners will also have a head type designed to match a specific type of screwdriver, the most common being slotted and crosshead.
What are LedgerLOK screws used for?
LedgerLOK is a code-compliant structural wood screw engineered to fasten a deck ledger board to the rim joist of a house with no predrilling.
Is it better to use nails or screws when framing?
Nails are often preferred for structural joining, including framing walls, because they are more flexible under pressure, whereas screws can snap. Nails are also called upon when securing plywood sheathing for exterior walls, installing hardwood floors, and attaching siding and roofing.
What can I use instead of lag bolts?
Structural screws (also called “construction” screws) are stronger than lags and make longer-lasting connections. You can just zip them in with any 18-volt drill (no pilot hole required).
What are the best screws for framing?
As for screws, two popular framing options are structural screws and construction screws. A good standard screw would be a number 9, 2.5-inch construction screw. A few other tips: When choosing the length of nail or screw, the fastener should be 1.75 to 2 times the length of the pieces you are connecting.
What is a structural screw?
Structural screws are heavy-duty fasteners that offer a stronger and more secure connection than traditional screws. They are also known simply as construction screws because of their prevalence in the construction industry.
What is a lag bolt?
Also commonly known as lag bolts, lag screws are some of the toughest fasteners. These extremely sturdy fasteners are usually used to connect heavy lumber or other heavy materials that are bearing an intense load. These screws differ from normal wood, self-drilling or sheet metal screws.
Do TimberLOK screws rust?
GUARANTEED CORROSION RESISTANCE
TimberLOK is guaranteed not to rust or corrode for the life of the project. The coating on this fastener has been tested in wood treatment chemicals, such as ACQ, and found to provide equivalent protection to code-approved hot-dipped galvanized coatings.
What is a strong drive screw?
The Strong-Drive SD Connector screw is specifically designed to replace nails in certain Simpson Strong-Tie connectors and is the only screw approved for that application. The load-rated SD screw has been tested and approved for use in many popular Simpson Strong-Tie products.
What is a truss screw?
Truss head (or mushroom) screws are characterized by a low, slightly rounded surface and an extra-wide top. Truss head screws have a lower profile than other rounded head screws; thus, they can prevent tampering. Their wide head makes them suited to fasten sheet metal workpieces with large diameter holes.
