5 Pin Relay
5 pin relays provide 2 pins (85 & 86) to control the coil and 3 pins (30, 87 & 87A) which switch power between two circuits. They have both normally open and normally closed connection pins. When the coil is activated, power will be switched from the normally closed pin to the normally open pin.
How does a 5 pin SPDT relay work?
A relay with five pins typically has two to operate the coil and three to incorporate an SPDT switch function with a common and a normally open contact (open when the relay is unenergized and connected to common when the relay is energized) and a normally closed contact with the opposite function.
What does 87a mean on a relay?
Numbers of a Relay
Note that each pin is numbered. 85 and 86 are the coil pins while 30, 87, and 87a are the switch pins. 87 and 87a are the two contacts to which 30 will connect. If the coil is not activated, 30 will always be connected to 87a. Think of this as the relay in the Normally Closed (OFF) position.
What is a 5V relay module?
A 5v relay is an automatic switch that is commonly used in an automatic control circuit and to control a high-current using a low-current signal. The input voltage of the relay signal ranges from 0 to 5V.
Can I use a 5 pin relay as a 4 pin?
Some 5 pin relays are SPDT (switch between the two pins) and some are DPST (like the main relay- connect 2 pins at the same time.) If you want to use a 5 pin in place of a 4 pin, you shouldn’t have to remove the pin. The socket should be the same, but the center pin won’t have a contact in it.
What is 85 and 86 on a relay?
Realizing that 85 and 86 are the coil pins, these pins will be transferring the current through the coil. 85 will be used to ground your relay, while 86 will be connected to the switchable power. 87 and 87a will be connected to your controlled accessories that you wish to turn on and off with your relay.
Why use a relay instead of a switch?
Relays can reduce the need for high-amperage wiring and switches, which are expensive and take up space. Therefore, switching to relays in your electronic systems can reduce the size or weight of a casing, for instance, or allow manufacturers to fit more functionality into a space of the same size.
Are all 5 pin relays the same?
The problem is, not all relays are the same. Many relays, if installed for the wrong application, could and will cause a short (Internal Relay Circuit) and most likely cause functionality issues or even damage to the vehicle computer systems.
How a relay works 12v?
Relays install between the power source and the electrical accessory requiring on/off power. When the relay is energized, the high current to operate the accessory flows from the power source, through the relay, and directly to the part.
