Since the thermocouple regulates gas going to the pilot, it should cut off on its own if the pilot ever goes out, but that’s only if it’s functioning correctly. If the thermocouple isn’t working properly, then it’s possible that it’s allowing gas to leak into the very room where the heater is located.
How much does a gas fireplace pilot light cost?
Running a pilot light for 1 hour costs about 1 cent (0.62 cent/hour for natural gas and 1.64 cent/hour for propane). Monthly costs of running a pilot light range from $4.49/month (natural gas) to $11.34/month (propane).
Should I turn off fireplace pilot light in summer?
A little heat is produced when your pilot light is on so turning it off in summer can help reduce the heat inside your home. The less heat there is, the less you have to use your air conditioner needs to cool down the house. You can get savings and conserve energy if you turn off your pilot light.
Should I turn off the pilot light on my gas fireplace in the summer?
As the weather warms up, it is time to put your gas fireplaces and furnaces to rest for the summer. Since it will be several months before you need to fire up the heat again, it is worth considering turning off your system’s pilot light.
Why will my gas fireplace not stay lit?
Improper gas pressure
The thermocouple and thermopile are the two most common reasons why a gas fireplace won’t stay lit. However, there are other possibilities out there. Another common culprit is incorrect gas pressure. As the seasons pass, you may find that your gas pressure drops below where it needs to be.
Why won’t my gas fireplace light up?
Check the Spark Igniter
If gas is coming out of the pilot but it still won’t light, the spark igniter could be the problem. You should clear out any debris between the igniter and thermocouple. Blowing compressed air into the pilot area, waiting a couple minutes, then trying again could help to fix the problem.
What does it mean when your pilot light won’t stay lit?
If your pilot light won’t stay alight, it might be the thermocouple. Sometimes dust buildup collects on the thermocouple and blocks the sensor. Try cleaning the thermocouple and then relighting the pilot light. If it continues to go out, the thermocouple might need to be replaced.
Can I relight the pilot light by myself?
If your pilot light goes out, your furnace will not be able to produce heat because its burners will not ignite. Often, homeowners can relight the pilot themselves.
What happens if fireplace pilot light goes out?
A pilot light may need to be re-lit from time to time after being extinguished on purpose or by accident. If it is accidentally extinguished, there exists a danger that the gas used to keep the flame lit will continue to vent, possibly into the living space.
How do I stop the wind from blowing out my pilot light?
A pilot light shield will cover the pilot light to help prevent it from going out. You can buy one at the hardware store and install it yourself to see if that resolves the problem. Will work best if the problem keeps happening due to a draft in the room. Many gas water heaters connect to the chimney for ventilation.
Can you leave gas fireplace pilot on overnight?
Is it safe to leave the pilot light on all the time? Generally speaking, it is safe to leave your continuous pilot light on at all times, assuming it stays lit (more on this in a moment). While it does cost more to keep your pilot light on in between uses, it can actually have some benefits to your system.
Can you leave a gas fireplace on overnight?
The short answer is this: gas fireplaces that are fully vented and have safely and properly sealed glass fronts are fine to be left alone to run continuously.
Can a pilot light cause carbon monoxide?
A yellow or orange pilot light will produce carbon monoxide – an odourless, colourless gas that can fill your home and cause carbon monoxide poisoning. Symptoms of this condition include dizziness, headache, fatigue, nausea, unconsciousness, brain damage and death.
Do gas fireplaces burn a lot of gas?
Based on the currently available models, gas log sets burn anywhere from 60,000 – 90,000 BTUs of gas per hour. On the other hand, the more efficient gas fireplaces use 10,000 – 70,000 BTUs/hour. In comparison, the average furnace requires around double the amount of gas.
