Here’s what you’ll need:
Warm water. Some people say you should use hot water, but there’s no real benefit to that. Dish soap (or record cleaning solution) Dish soap is the cheapest option, but it will leave a bit of residue on your records. Carbon Fiber Brush. Soft, Lint-Free Cloth.
How do you clean vinyl records without damaging them?
Begin by gently brushing the surface of the record in a circular motion (always follow the grooves) with the brush. Don’t use too much pressure here – you’re goal is to pick up larger dust and dirt on the record but you don’t want to damage the grooves.
Is it OK to clean vinyl records with alcohol?
Cleaning your vinyl records with pure alcohol is not safe and you should never use undiluted alcohol to clean them. Some commercially available record cleaning solutions do contain a small concentration of isopropyl alcohol, but this is mixed with other ingredients.
Can you use wd40 on vinyl records?
WD-40 is a great vinyl record cleaning product. It does not contain any ammonia or alcohol, and it is a volatile solvent. After use, it will remove the dirt or dust, evaporate and leave behind a non-volatile lubricant.
Can you clean a vinyl record with water?
Absolutely you can clean vinyl records with water. It is best if you use distilled or deionized water in order to remove all potential deposits and contaminants from the water. You do not want to use tap water as calcium deposits and chemicals can leave behind residue on the vinyl record itself.
Can I use Windex to clean my vinyl records?
You can now proceed to use Windex. Remember, as it’s harsher than just water and soap, so only spray a little on the records. A few sprays will do as you’re going to spread the solution by using your microfiber cloth anyway. Wipe the records gently until the Windex dries up and polishes the records.
Can you fix scratched records?
Apply a thin line of epoxy or wood glue to the scratched area. Use a toothpick to ease into the crack and allow time for it to seep in thoroughly. If there are multiple scratches, apply glue to the entire record as it spins on your turntable.
Can you use vinegar to clean vinyl records?
Clean with just water
Mix equal parts white vinegar and distilled water in a clean spray bottle. Spray the mixture over the surface of the vinyl and allow it to sit for a few minutes. Then, take a clean, dry microfiber cloth or sponge and remove the vinegar mixture from the vinyl.
How do you clean a dirty record?
How to Clean Vinyl Records
Wipe gently. Remove all dust and static using a microfiber cloth, using very little pressure to avoid driving any particles further into the grooves in the vinyl. Rinse. Apply Simple Green solution. Damp-wipe clean. Dry. Spin and store properly.
Can I clean vinyl with dish soap?
The ideal cleaning solution consists of one part distilled water, one part isopropyl alcohol, and a couple of drops of dish soap. This exact mixture is a tried and tested mixture to clean vinyl records with a DIY mixture that’s pretty easy to put together.
What liquid cleans records?
Isopropyl Alcohol, Distilled Water, and Dishwashing Soap
The exact mixture is one part isopropyl alcohol, one part distilled water, and one to two drops of dishwashing soap. This combination of fluids is widely recommended as an efficient mixture to clean records using what are household materials.
How do you restore old vinyl records?
Repairing a Scratched Record
Gently wash your vinyl with water to remove any obvious debris.Grab a piece of 1500 grit sandpaper and wet it. Wet your vinyl as well and place it on a hard, flat surface.Lightly sand each side of the vinyl where there are scratches.
